Step-By-Step Guide - Mastering Your New Shower Unit Installation

Step-By-Step Guide - Mastering Your New Shower Unit Installation

Blog Article

Request Estimate

We've stumbled upon this great article about Simple ways to Install a Shower Cubicle on Your Own directly below on the internet and felt it made perfect sense to relate it with you on my blog.

A successful shower installment requires careful planning and a lot of job. Most of the times, you will certainly need to do three types of tasks: framing wall surfaces, mounting the plumbing, and also completing walls.

Preparation

Firstly, you have to select the type of shower that you wish to set up. It is important to ascertain whether the picked shower can handling certain systems and also can control a safe degree of water with the boiler. The majority of shower units nowadays are made to be versatile to various water pressures (such as stored warm water and also cold mains).
It is additionally crucial to take into consideration the water pressure and also the preparation of the piping and also drain for the shower

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be linked to the bath faucet as per your need, and the water temperature level can be changed using the taps. Push-on mixers are cheap and also incredibly straightforward to install. Nevertheless, although the hose link is simple, it is conveniently removed. Additionally, it is troublesome to readjust the temperature level.

Bath/Shower Mixer: The hose and also spray of this type of shower are incorporated with a bathroom mixer tap, and also the temperature can be changed via the bath faucets. It is a very affordable alternative and no additional plumbing is entailed. However, the bath/shower mixers additionally suffer from troublesome temperature level control options.

Handbook Mixer: The hose as well as spray of a hand-operated mixer shower unit are a part of the wall surface unit as well as the cold and hot water products are linked to a single shutoff The temperature level and stress of the water are controlled through either one or a range of handles (in much more pricey showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are more costly than the previously discussed mixers. They likewise call for additional plumbing of hot and cold water system pipelines.

Thermostatic Mixer: The pipe and also spray of this shower kind belong of the wall system and also the hot and cold water materials are attached to a single valve right here too. It is total with an integrated stabiliser to self-adjust the water temperature level and to avoid it from coming to be also hot. Among the largest advantages of a thermostatic mixer shower type consists of hassle-free temperature control. Nevertheless, it is the most costly of the different mixer choices.

Power Shower: A power shower is a solitary device having an effective electrical pump that is capable of modifying both the water pressure and also temperature level. This type of shower can be fitted if there is water system from a cold water cistern and also a hot water cyndrical tube. A power shower makes the modification of both stress and also temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it warms the water electrically. It is essential to keep in mind that for this shower kind to be mounted, the keys stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system allows the temperature level and stress to be changed by means of a knob. Models with temperature level stabilisers are much better as they continue to be untouched by various other faucets in other places in operation within the home. A major drawback of electric showers is that the control knob only allows for the option of high temperatures at less pressure, or reduced temperature levels at a better stress. This is bothersome in the winter when the spray is typically weak as well as the mains water is colder. Nonetheless, this trouble is taken on in some versions which are offered with a winter/summer setting.

Technique

Depending on the sort of shower you desire to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check shutoff.
Before starting, it is advisable to note the placements of the shower head and control, as well as to plan the pipe-work involved. In addition, the water drainage system to eliminate the waste water will require to be intended. Both settings of the cable television route and also the shower button will also require to be thought about if an instant or electric shower device is being set up.
Use the direction guide given with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is necessary to cut off the water supply. In order to secure the pipes, they need to be provided a waterproof covering as well as also fitted with separating shutoffs. The pipes can after that be buried right into the wall and plastered over to neaten the total appearance.
Fit the base tray, shower head, and installations.
Connect the major shower control to the pipelines that will certainly be providing the water (This might require a women screw thread adapter).
Reconnect the water as well as examination the pipes for any kind of leaks, as some might need firm.
If you are setting up an electrical shower, keep in mind to switch off the electrical energy supply before making any kind of electrical links. Once these links have been made (there must be guidance within the user's manual), the power supply can be changed back on.

Adjusting Water Pressure to Match Your Shower

The cold water tank can be raised to a greater elevation (sometimes as low as 150mm (6inches)) by installation a strong wood support underneath it - perhaps composed of struts as well as blockboards. If you choose this choice, the primary and also distribution pipelines will certainly also need to be elevated to meet the new height of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be attached into the power supply in order to operate.

Piping as well as Water drainage

It is best to use 15mm size supply pipelines, and make the runs to the shower as brief and also straight as possible so as to maintain optimal stress and minimise warm loss. In addition, by minimising making use of joints for pipe corners, you can reduce the resistance in the circulation of the water supply. You can achieve this by bending the pipelines rather.

Most Common Errors

Breaching or overlooking local code restrictions.

Using pipes that are too small.

Attaching copper to galvanized without utilizing a brass or dielectric suitable in between both.

Not making use of tape or pipe substance at threaded joints.

Uneven your components when installing them.

Not installing an air gap filling up for fixtures.

Cutting supply stub outs too short to install the shutoff valves onto after the finished wall is in place.

Not correctly aligning tubing into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will certainly cause a leakage.).

When turning the water back on in your house, always run the outdoors hose pipe shutoff or flush your commodes to hemorrhage dust and also air from the lines. This debris can cause problems in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you really like reading up on How to Install a Direct-to-Stud Shower Enclosure? Put a short review further down. We'd be delighted to hear your thoughts about this piece. Hoping that you visit us again before long. Sharing is caring. Helping others is fun. Thanks for your time invested reading it.

Pricing

Report this page